MEETNAIL “P” Nail Art Set

1. Manicure
Use nail clippers to trim your nails to your favorite nail shape, and then use a nail file to trim uneven areas around the nails.
2. Push dead skin
After removing the surrounding dead skin, first use a steel pusher to push the dead skin on the nail surface from the outside to the inside, then lift the dead skin upward, and then use the dead skin scissors to cut off the dead skin.
3. Cut finger skin
Use nail clippers to trim the thorns around the nails.
4. Polish the nail surface
Use a sponge file to polish the nail surface. When polishing, the rear edge of the nail and the front part of the nail should be polished neatly. If the nail surface is not smooth, the nail polish will fall off easily.
5. Clear dust
After sanding the nail surface, use a dust brush to clean the seal layer left after sanding.
6. Primer
The main function of applying the light therapy lamp for 1 minute (30 seconds of LED light) is to increase the combination of nails and nail polish, so that the nail polish can last longer.
7. Apply nail polish
The first time the nail polish is applied, it must be applied thinly and evenly, adhere to the principle of a small amount and many times, and illuminate the light therapy lamp for 2 minutes (LED lamp for 1 minute)
8. Seal
Apply the first coat of the sealant to the phototherapy lamp for 1 minute (LED lamp for 30 seconds),
Apply a second coat of sealant and illuminate for 2 minutes with phototherapy lamps (1 minute with LED lamps)
9. Cleaning solution to clean surfaces
Wash the surface with a cleaning solution after the seal has been exposed for 2 minutes.
In this way, the nail art is completed. It should be noted that the nail polish is slightly different, and the lighting time is also slightly different.